IN.Hype Hard Builder Gel - Natural #5

Name: IN.Hype Hard Builder Gel - Natural #5
Brand: In.Hype
Price: 17.5 USD
Availability: InStock

$17.50

Color

Quantity

1
2
3
4
5
6
7
8
9
10 +

Quantity

Description
Ingredients
How to Apply

In.Hype Builder Gel is a hard gel ideal for strengthening and extending nails of any length. Nail sculpting has never been so comfortable!

The gel is easy to apply and distribute: you can easily adjust the thickness of the free edge thanks to the medium viscosity of the material. It self-levels so easily and does the job for you!

It’a a two-phase builder gel. It doesn’t have a high concentration of acid, so it won’t heat in the lamp! But at the same time, it requires a primer and a base coat to be applied on the nail plate prior to the gel.

The neutral pink tone goes well with the natural color of the nail providing see i-sheer coverage, but still covering up any imperfections.

Thickness: Medium (2/5), will easily self-level, but will not run into the cuticles. Has a perfect consistency to form the smile line for a French manicure, as it's easy to control. Suitable for a no-filing technique!
Pigmentation: Medium pigmentation provides buildable coverage from semi-sheer to opaque.
Heat production: No heat. To avoid heat spikes cure the gel for 60 seconds on slow mode.
Requires a base coat. We recommend using IN.HYPE Elastic Base for the best adhesion especially if the nails are thin and problematic.
Cure in hybrid UV/LED lamps at least 46 watts to get the best results.
This product has a sticky layer after curing. You can remove it using Rubber Alcohol 70% or a cleanser.
It's a soak-off gel. But we recommend filing of the main portion of the gel to leave 1mm of height and then soaking it off with acetone.

Ingredients: Polyacrylate-22, 2-hydroxyethyl methacrylate, Cellulose acetate butyrate, 2-Propenenitrile, products 1,3 propanediol salts, Ethyl Trimethylbenzoyl Phenylphosphinate, Dimethicone

Step-by-Step Guide:

1. Prepare the Natural Nails:

Start by shaping the natural nails using a nail file.
Gently push back the cuticles using a cuticle pusher.
Use a nail dehydrator to remove any oils or residue from the nail surface.

2. Apply a thin layer of In.Hype Elastic base coat and cure it under the lamp. This can improve adhesion.

3. Apply Nail Tips (if using):

4. Apply a Thin Layer of Builder Gel:

Dip the UV gel brush into the builder gel and pick up a small bead of gel.
Apply this bead to the nail surface, starting near the cuticle area and gently brushing it toward the free edge.
Be careful not to touch the skin or cuticles.

5. Cure Under the UV or LED Lamp:

Place the hand with the freshly applied gel into the lamp.
Cure the gel according to the manufacturer's instructions. Typically, this is around 2-3 minutes for UV lamps and 30-60 seconds for LED lamps.
Ensure that the gel is fully cured, as under-curing can lead to peeling or lifting.

6. Apply Top Coat and Cure:

IN.Hype Hard Builder Gel - Natural #5

$17.50

FAQ

Why the Gel is too thick?

At lower temperatures, UV builder gel may become thicker and more difficult to work with.

Warming UV builder gel in warm water is a common practice to restore its original viscosity. Placing the gel container in warm water for a short period can help soften it, making it easier to apply and manipulate during the nail extension or enhancement process. This allows for smoother and more precise application, ensuring that the gel adheres well to the natural nail and cures properly under UV or LED lamps.

Whe does the Gel peel off?

UV builder gel can peel for several reasons, and understanding these factors can help prevent this frustrating issue:

Improper Nail Preparation: One of the most common reasons for UV builder gel peeling is inadequate nail preparation. If the natural nail is not properly cleaned, dehydrated, and free from oils or residue, the gel may not adhere well, leading to peeling.
Incompatibility: Using products from different brands or systems that are not designed to work together can lead to adhesion issues and eventual peeling.
Application Errors: Applying the gel too thickly, unevenly, or without proper curing under a UV or LED lamp can result in peeling. It's crucial to follow the manufacturer's instructions for application and curing times.
Nail Flexibility: The natural nail has some degree of flexibility, and if the UV builder gel is too rigid or thick, it may not move with the natural nail, leading to peeling.
Nail Contour and Length: UV builder gel is designed for nail enhancements, and if the length or shape of the nail is too extreme, it can put extra stress on the gel, causing it to lift or peel.
Nail Trauma: Any significant impact or trauma to the nail, such as banging it against hard surfaces, can cause the gel to lift or peel.